What kind of 48V input power supply will be higher(4)

(6) For the module power supply, some manufacturers have a fixed resistance directly connected to the adjustable terminal (ADJ) from the factory. When using, the user must configure a potentiometer with the corresponding resistance value to replace the fixed resistance. However, it should be noted that when the adjustable terminals are in an open state, loading is never allowed.
(7) In order to achieve sufficient heat dissipation, the module power supply should be installed in a location with better air convection. Generally, when the working current of the linear power supply is above 4A, or the working current of the switching power supply is above 7A, forced air cooling should be installed. In addition, no other items are allowed on the module power supply housing.
(8) The module power supply is generally suitable for resistive-based loads. If it needs to be applied to capacitive-based or inductive-based loads, it should be explained in the order contract in advance and customized by the manufacturer.

Electrolytic capacitors, aluminum electrolytic capacitors and monolithic gallbladders, which use sulfuric acid to make the insulating medium, large capacity can carry out smaller volumes for the above, and are marked with a + sign, some are marked with a mark, generally do low cross-linking and side-by-side Circuit filter with larger loss meson, integral aluminum electrolytic capacitor, due to the shortcomings of using special materials, the electrolytic performance is better than ordinary, the preferred frequency, but can not do too much capacity, it can be used to accurately circuits, such as oscillators, or timing circuits.

48V input power supplyFive: aging and batch test high temperature aging test

No matter how good the material and production technology process control of the product is, it is necessary to detect the aging of the equipment. Because the incoming inspection of electronic components and transformers is difficult to control, only by improving the aging and high-temperature sampling of the entire batch of power supplies can we detect whether the quality stability and material management of this batch of power supplies have potential safety risks.